jeka/MyOwnEtherCATDevice
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Admin. nothing significant

Browse Source
This commit is contained in:
Hakan Bastedt
2025-03-08 23:41:00 +01:00
parent 3df3d63fff
commit a283091a3f
3 changed files with 8 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Cards/EaserCAT-7000-DIO+I2C/Firmware/src/main.cpp
View File

@@ -113,7 +113,7 @@ void cb_get_inputs(void) // Set Master inputs, slave outputs, last operation
ads1014_reset();
old_I2Cdevice = ADS1014_TYPE;
}
data0 = ads1014->getValue();
data0 = ads1014->getValue();
stat = ads1014->isConnected() == 1 ? 0 : 1;
break;
default: // Not supported
@@ -198,8 +198,10 @@ void setup(void)
ecat_slv_init(&config);
#endif
#if 0 // Uncomment for commissioning tests
#if 1 // Uncomment for commissioning tests
// #define only one of the below
#define ADS1xxx
#undef ADC_MCP3221
digitalWrite(outputPin[0], HIGH); // All four output leds should go high
digitalWrite(outputPin[1], HIGH);
digitalWrite(outputPin[2], HIGH);
@@ -211,7 +213,7 @@ void setup(void)
ads1014 = new ADS1014(0x48, &Wire2);
ads1014_reset();
#endif
while (1) // Apply voltage over the inputs 0-11 and see response in terminal
while (1) // Search I2C bus for devices
{
int nDevices = 0;
for (int i2caddr = 1; i2caddr < 127; i2caddr++)