faulty .gitignore

Cards/EaserCAT-2000/linuxcnc/Turner.2ms/halshow.preferences

@@ -0,0 +1,22 @@
+# Halshow settings
+# This file is generated automatically.
+wm geometry . 700x475+1121+46
+placeFrames 0.3
+set ::ratio 0.3
+set ::old_w_leftf 160
+set ::watchlist {
+    pin+lcec.0.0.DiffT
+    pin+lcec.0.0.D1
+    pin+lcec.0.0.D2
+    pin+lcec.0.0.D3
+    pin+lcec.0.0.D4
+    pin+lcec.0.0.commanded-position-2
+    pin+lcec.0.0.actual-position-2
+}
+set ::workmode watchhal
+set ::watchInterval 100
+set ::col1_width 100
+set ::ffmts 
+set ::ifmts 
+set ::alwaysOnTop 0
+set ::autoSaveWatchlist 1