faulty .gitignore

Cards/EaserCAT-2000/linuxcnc/Turner.2ms/Turner.ini

@@ -0,0 +1,164 @@
+# This config file was created 2016-11-26 11:13:55.093594 by the update_ini script
+# The original config files may be found in the /home/debian/linuxcnc/configs/Turner/Turner.old directory
+
+# Generated by PNCconf at Fri Sep  9 22:31:33 2016
+# If you make changes to this file, they will be
+# overwritten when you run PNCconf again
+
+[EMC]
+# The version string for this INI file.
+VERSION = 1.1
+
+MACHINE = Turner
+DEBUG = 0
+
+[DISPLAY]
+LATHE=1
+DISPLAY = gmoccapy
+BACK_TOOL_LATHE = 0
+CYCLE_TIME = 150
+POSITION_OFFSET = RELATIVE
+POSITION_FEEDBACK = ACTUAL
+MAX_FEED_OVERRIDE = 2.000000
+MAX_SPINDLE_OVERRIDE = 2.000000
+MIN_SPINDLE_OVERRIDE = 0.500000
+INTRO_GRAPHIC = linuxcnc.gif
+INTRO_TIME = 1
+PROGRAM_PREFIX = /home/debian/linuxcnc/configs/Turner/nc_files
+INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm
+LATHE = 1
+POSITION_FEEDBACK = ACTUAL
+DEFAULT_LINEAR_VELOCITY = 6.000000
+MAX_LINEAR_VELOCITY = 25.000000
+MIN_LINEAR_VELOCITY = 0.500000
+DEFAULT_ANGULAR_VELOCITY = 12.000000
+MAX_ANGULAR_VELOCITY = 1800.000000
+MIN_ANGULAR_VELOCITY = 1.666667
+EDITOR = gedit
+
+#EMBED_TAB_NAME = Cycles
+#EMBED_TAB_LOCATION = ntb_preview
+#EMBED_TAB_LOCATION = ntb_user_tabs
+#EMBED_TAB_COMMAND = halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -U notouch=1 -U norun=0 -u lathehandler.py -x {XID} lathemacro.ui
+
+[FILTER]
+PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
+PROGRAM_EXTENSION = .py Python Script
+png = image-to-gcode
+gif = image-to-gcode
+jpg = image-to-gcode
+py = python
+
+[RS274NGC]
+PARAMETER_FILE = linuxcnc.var
+SUBROUTINE_PATH = .:../../nc_files/subs:nc_files:../../../nc2
+RS274NGC_STARTUP_CODE = G18 G21 G40 G49 G54 G80 G90 G94 G7 M9 M5 G64 P0.005
+FEATURES=12
+USER_M_PATH = nc_files:.
+
+[EMCMOT]
+EMCMOT = motmod
+COMM_TIMEOUT =     1.0
+COMM_WAIT    =   0.010
+BASE_PERIOD  =  100000
+SERVO_PERIOD = 2000000
+
+[TASK]
+TASK = milltask
+CYCLE_TIME = 0.001
+
+[HAL]
+TWOPASS = true
+HALUI = halui
+HALFILE = Turner.hal
+#HALFILE = custom_vfd.hal
+HALFILE = custom.hal
+#HALFILE = xhc-hb04.tcl
+#HALFILE = monitor_xhc-hb04.tcl
+POSTGUI_HALFILE = postgui_call_list.hal
+SHUTDOWN = shutdown.hal
+
+[TRAJ]
+COORDINATES = X Z
+LINEAR_UNITS = mm
+ANGULAR_UNITS = degree
+CYCLE_TIME = 0.010
+DEFAULT_LINEAR_VELOCITY = 20.0
+MAX_LINEAR_VELOCITY = 40.00
+DEFAULT_ACCELERATION = 400.0
+MAX_ACCELERATION = 400.0
+NO_FORCE_HOMING = 1
+
+[EMCIO]
+EMCIO = io
+CYCLE_TIME = 0.100
+TOOL_TABLE = tool.tbl
+
+[KINS]
+KINEMATICS = trivkins coordinates=XZ
+#This is a best-guess at the number of joints, it should be checked
+JOINTS = 2
+
+#********************
+# Axis X
+#********************
+
+[AXIS_X]
+MIN_LIMIT = -106
+MAX_LIMIT = 106
+MAX_VELOCITY = 15.0
+MAX_ACCELERATION = 400.0
+
+[JOINT_0]
+
+TYPE = LINEAR
+HOME = 0.0
+FERROR = 0.5
+MIN_FERROR = 1
+MAX_VELOCITY = 20.0
+MAX_ACCELERATION = 400.0
+MAX_OUTPUT = 0.0
+MIN_LIMIT = -106
+MAX_LIMIT = 106
+HOME_SEARCH_VEL = 0
+HOME_LATCH_VEL = 0
+HOME_SEQUENCE = 0
+
+
+#********************
+# Axis Z
+#********************
+[AXIS_Z]
+MIN_LIMIT = -560.0
+MAX_LIMIT = 560.0
+MAX_VELOCITY = 50.0
+MAX_ACCELERATION = 400.0
+
+[JOINT_1]
+
+TYPE = LINEAR
+HOME = 0.0
+FERROR = 0.5
+MIN_FERROR = 1
+MAX_VELOCITY = 75.0
+MAX_ACCELERATION = 400.0
+HOME_SEARCH_VEL = 0
+HOME_LATCH_VEL = 0
+HOME_SEQUENCE = 0
+
+[SPINDLE_9]
+P = 0.0
+I = 0.0
+D = 0.0
+FF0 = 1.0
+FF1 = 0.0
+FF2 = 0.0
+BIAS = 0.0
+DEADBAND = 0.0
+MAX_OUTPUT = 2400.0
+OUTPUT_SCALE =5760
+OUTPUT_MIN_LIMIT = 0
+OUTPUT_MAX_LIMIT = 2400
+#ENCODER_SCALE = -4000
+ENCODER_SCALE = 2000
+