diff --git a/printer_data/config/crowsnest.conf b/3dsprinter_data/config/crowsnest.conf
similarity index 95%
rename from printer_data/config/crowsnest.conf
rename to 3dsprinter_data/config/crowsnest.conf
index 9829b07..ada3651 100644
--- a/printer_data/config/crowsnest.conf
+++ b/3dsprinter_data/config/crowsnest.conf
@@ -29,7 +29,7 @@
 
 
 [crowsnest]
-log_path: /home/jeka/printer_data/logs/crowsnest.log
+log_path: /home/jeka/3dsprinter_data/logs/crowsnest.log
 log_level: verbose                      # Valid Options are quiet/verbose/debug
 delete_log: false                       # Deletes log on every restart, if set to true
 no_proxy: false
@@ -40,7 +40,7 @@ mode: ustreamer                         # ustreamer - Provides mjpg and snapshot
 enable_rtsp: false                      # If camera-streamer is used, this enables also usage of an rtsp server
 rtsp_port: 8554                         # Set different ports for each device!
 port: 8080                              # HTTP/MJPG Stream/Snapshot Port
-device: /dev/video0                     # See Log for available ...
+device: /dev/video1                     # See Log for available ...
 resolution: 640x480                     # widthxheight format
 max_fps: 15                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
 #custom_flags:                          # You can run the Stream Services with custom flags.
diff --git a/printer_data/config/crowsnest.conf.2024-07-05-2151 b/3dsprinter_data/config/crowsnest.conf.2024-07-05-2151
similarity index 100%
rename from printer_data/config/crowsnest.conf.2024-07-05-2151
rename to 3dsprinter_data/config/crowsnest.conf.2024-07-05-2151
diff --git a/printer_data/config/macros.cfg b/3dsprinter_data/config/macros.cfg
similarity index 100%
rename from printer_data/config/macros.cfg
rename to 3dsprinter_data/config/macros.cfg
diff --git a/printer_data/config/moonraker.conf b/3dsprinter_data/config/moonraker.conf
similarity index 96%
rename from printer_data/config/moonraker.conf
rename to 3dsprinter_data/config/moonraker.conf
index 86f5a17..e56326a 100644
--- a/printer_data/config/moonraker.conf
+++ b/3dsprinter_data/config/moonraker.conf
@@ -1,7 +1,7 @@
 [server]
 host: 0.0.0.0
 port: 7125
-klippy_uds_address: /home/jeka/printer_data/comms/klippy.sock
+klippy_uds_address: /home/jeka/3dsprinter_data/comms/klippy.sock
 
 [authorization]
 trusted_clients:
@@ -52,6 +52,13 @@ path: ~/crowsnest
 origin: https://github.com/mainsail-crew/crowsnest.git
 install_script: tools/pkglist.sh
 
+[update_manager klipper-backup-3dsprinter]
+type: git_repo
+path: ~/klipper-backup-3dsprinter
+origin: https://github.com/Staubgeborener/klipper-backup.git
+managed_services: moonraker
+primary_branch: main
+
 [update_manager klipper-macros]
 type: git_repo
 origin: https://github.com/jschuh/klipper-macros.git
@@ -60,13 +67,6 @@ primary_branch: main
 is_system_service: False
 managed_services: klipper
 
-[update_manager klipper-backup-3dsprinter]
-type: git_repo
-path: ~/klipper-backup-3dsprinter
-origin: https://github.com/Staubgeborener/klipper-backup.git
-managed_services: moonraker
-primary_branch: main
-
 [power printer]
 type: gpio
 pin: gpiochip1/gpio26
diff --git a/printer_data/config/moonraker.conf.backup b/3dsprinter_data/config/moonraker.conf.backup
similarity index 100%
rename from printer_data/config/moonraker.conf.backup
rename to 3dsprinter_data/config/moonraker.conf.backup
diff --git a/printer_data/config/printer.cfg b/3dsprinter_data/config/printer.cfg
similarity index 98%
rename from printer_data/config/printer.cfg
rename to 3dsprinter_data/config/printer.cfg
index ec39269..b92ae1d 100644
--- a/printer_data/config/printer.cfg
+++ b/3dsprinter_data/config/printer.cfg
@@ -2,7 +2,7 @@
 [include fluidd.cfg]
 
 [virtual_sdcard]
-path: /home/jeka/printer_data/gcodes
+path: /home/jeka/3dsprinter_data/gcodes
 on_error_gcode: CANCEL_PRINT
 
 [include macros.cfg]
diff --git a/printer_data/config/shell_command.cfg b/3dsprinter_data/config/shell_command.cfg
similarity index 100%
rename from printer_data/config/shell_command.cfg
rename to 3dsprinter_data/config/shell_command.cfg
diff --git a/printer_data/config/telegram.conf b/3dsprinter_data/config/telegram.conf
similarity index 81%
rename from printer_data/config/telegram.conf
rename to 3dsprinter_data/config/telegram.conf
index f681308..8046fc3 100644
--- a/printer_data/config/telegram.conf
+++ b/3dsprinter_data/config/telegram.conf
@@ -1,12 +1,12 @@
 #  Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
 
 [bot]
-server: 192.168.47.5:7125
+server: 192.168.47.44:7125
 bot_token: 7093071502:AAFGW5ygvu9oRgsZsS0CpU8-hy8x_oaxlsc
 chat_id: 158812314
 
 [camera]
-host: http://192.168.47.5:7575/webcam/?action=stream
+host: http://192.168.47.44/webcam/?action=stream
 
 
 [progress_notification]